Versione Italiana
Italiano


 

Rigid pockets Turbogas - high efficiency pockets/panels


Rigid pocket filters - TURBOGAS
  • measures 288-593 X 593 X 292-420 mm
  • efficiency classes from F7 to F9 (EN 779)
  • rigid incinerable plastic frame
  • filter media: dual layer of water-repellent microfibre glass
  		• pleat separation by thermowelded threads
  		• foamed neoprene gasket (standard execution for H 420 mm)

    Technical caracteristics:
  • initial dP 150 Pa (F7) - 170 Pa (F8) - 130 Pa (F9)
  • final dP 600 Pa
  • dP max. 1000 Pa
  • temperature 80°C
  • humidity 100%

    Upon request:
  		• protective grids on the air exit side



    Rigid pocket filters - HIGH EFFICIENCY
  • measures 288-402-491-593 X 593 X 292 mm
  • efficiency classes from H10 to H12 (EN 779)
  • rigid incinerable plastic frame
  • filter media: microfibre glass
  • pleat separation by thermowelded threads

    Technical caracteristics:
  • initial dP 250 Pa (H10) - 280 Pa (H11) - 300 Pa (H12)
  • final dP 600 Pa
  • dP max. 1000 Pa
  • temperature 80°C
  • humidity 100%

    Upon request:
  		• protective grids on the air exit side
  		• foamed neoprene gasket



    Panel filters - HIGH EFFICIENCY
  • measures 305-610-457 X
      305-457-610-762 X
      150-292 mm or
      288-593 X 593 X 292 mm
  • efficiency classes F6 - F7 - F8 - H10 - H13 - H14 (EN 779)
  • frame in MDF or galvanized metal (foto: MDF frame)
  • filter media: microfibre glass
  • pleat separation by thermowelded threads
  		• pleated media sealed to the frame with PUR-based bi-component
  		• foamed single-piece gasket in neoprene /PUR

    Technical caracteristics:
  • initial dP 130 Pa (F6) - 150 Pa (F7) - 170 Pa (F8) - 125 Pa (H10) - 250 Pa (H13) - 280 Pa (H14)
  • final dP 600 Pa
  • dP max. 1000 Pa
  • temperature 80°C (MDF frame ) - 90°C (metal frame)
  • humidity 90% (MDF frame) - 100% (metal frame)

    Upon request:
  		• protective grids on one or both sides (only efficiency classes H)
    < Back to category
    		Print Page